You aren’t alone if you’ve ever fired up your gadget and took a good, long drag only to gasp and choke on a scorching, foul-tasting hit. Burned impacts are unpleasant and dangerous and should be avoided at all costs. Continue reading to learn more:
- What’s the matter?
- Why does my vape have a burned flavor?
- And what can I do about it?
Hits that have been burned vs. hits that have not been burned
Before we go into the mechanics of burning hits, it’s crucial to distinguish. Most vapers have had dry hits in addition to burned hits. The names are frequently used interchangeably. However, they refer to two distinct occurrences. So, what’s the difference between dry and burned hits?
We need to look into the inner workings of your vape equipment to understand dry hits.
What are e-cigarettes, and how do they work?
Unless you’re using anything unusual, like an ultrasonic vape, most e-cigarettes have a similar design and method of operation. The simplest mechanical devices consist of tubes that hold a battery and a tank on top. A coil of wire wrapped in some form of wicking material (typically cotton) and an area for the e-liquid to dwell make up the tank. An atomizer is a device that combines a coil with cotton. The user presses a button, which transmits electricity from the battery to the ring, which heats it, and then passes the heat to the cotton, which is saturated with e-liquid. When e-liquid warms up, it transforms into vapor (technically an aerosol) for inhalation by the user.
What exactly is a dry hit?
When your wick starts to dry out, and there isn’t enough juice in touch with your wire coil to generate enough vapor, you’ll get a dry hit. Dry hits are less flavorful and produce less smoke than normal hits. Because there is a burst of hot, dry air mixed in with your vape, it may taste terrible or irritate your throat. Dry sensations aren’t particularly unpleasant, but they should be seen as an indication that you’re on the verge of burning your coil.
What about hits that have been burned?
You probably won’t need to be told what a burned hit feels like if you’ve ever had one. It goes something like this for individuals who have been lucky (or diligent!) enough to escape scorched impacts entirely: You turn on your gadget, anticipating a smooth, pleasurable shot of flavored nicotine, but instead get a lungful of suffocating discomfort and a horrible, scorched aftertaste. Does this ring a bell?
What is the cause of a burned hit?
When not enough juice reaches your coil, the dry cotton wick begins to burn due to the coil’s heat. The end effect is a lungful of toxic, acrid smoke, which I’m sure isn’t good for your health. On the other hand, what are the fundamental reasons for burning hits?
Juice is running out.
Burnt hits are most commonly caused by a lack of juice in your tank (or on the wick if using a dripper) to keep your coil saturated. This can happen even if the tank isn’t empty.
Too much power
Exercising your vaping device’s power limitations is a sure-fire method to burn out your coils. When you exceed the manufacturer’s recommended wattage, the juice is burnt off the ring quicker than the tank can replenish it. This can easily result in cotton combustion and unpleasant, burnt-tasting hits.
Taking far too many blows
Chain vaping or taking too many puffs in succession may quickly dry up your coils and cause them to burn.
Vaping e-liquids with a high VG content
All e-liquids are composed of propylene glycol (PG) and vegetable glycerin (VG). They all have various properties and applications, and different vapers prefer varying VG/PG ratios in their juice. PG transports tastes better than VG, but it produces smaller clouds and has a harder throat punch. Sub-ohm users prefer juices with greater VG content.
VG is also significantly thicker than PG. You risk getting scorched hits if you use high VG juices in devices that aren’t built for sub-ohm vaping. This is because VG is too viscous to replenish coils in vapes that aren’t suited for it.
Not properly priming your coils
Before using your vape, make sure the cotton around your coils is completely saturated with e-liquid. The most common reason for burned hits is vaping too soon after replacing your lock. Because new waves are shipped completely dry, the risk is very significant. Before you start vaping, priming your coil guarantees that your wick is full of juice. For most users, priming is the best technique to avoid burning hits.
What is the best way to know whether my coil is burnt?
If you take a burned hit, you’ll notice coughing, spluttering, and a foul taste in your mouth. All coils, however, will ultimately degrade to the point where the cotton is burned. It is now time to remove it from your device and replace it with a fresh one. A decrease in overall vapor quality and flavor is the first clue that your coil is beyond its prime. You may also notice a reduction in the amount of vapor produced by your gadget.
If you’re not sure if your coil is burned, a visual check is one of the finest methods to find out. Examine your lock by opening up your gadget. It’s time to toss it in the garbage if you see any darkness or charring (a little wick discoloration is okay).
What’s the most effective strategy to avoid scorched hits?
The simplest method to avoid burned hits is to properly prime fresh coils before firing them up. Before burning the atomizer, make sure your coil and wick are completely soaked with e-liquid by priming them. The method you use to prime your coil is determined by the sort of gadget you have.
Coils that are based in a tank are primed.
Priming is the same for almost all replacement coils for tank-style vapes.
- Remove the foil packing from your coil.
- Using the wicking holes, drip a tiny quantity of juice straight onto the wick.
- Put the tank together.
- Fill with your favorite juice e-liquid.
- Leave the tank closed for 10 minutes.
It’s a good idea to start slightly below the minimum suggested temperature and work your way up if you have a device with a variable wattage option. Allowing a good 30 seconds between hits will enable the juice to soak the wick properly.
It’s normal for new coils to spew a little at first, as extra juice may have accumulated inside the ring. If the problem persists, try increasing the wattage on your gadget a bit. To avoid burning your coil, always keep under the specified operating wattages.
Preparing the vape pods
The priming procedure is considerably easier with refillable pods than with tank-style modifications. Because the coil is not replaceable, you must prime the entire pod. Here’s how to get started.
Fill your vape pod with the liquid of your choosing.
Set aside the pod for at least five minutes.
Please take a few drags without the battery attached from the pod itself. This allows more juice to flow through the pod and into the coil, preventing dry or burned hits.
Start your device after ten minutes and take little, spaced-out hits.
The coils within vape pods may require some “burning in” before performing at their best. Keeping your first hits short and light might assist speed up the process without overtaxing your coil.
What Causes My Vape to Taste Burned, and What Can I Do About It?
Other methods of avoiding scorched blows
If priming your coils isn’t the issue, you should consider changing your vaping habits. Dry hits may be avoided by taking adequate time between doses, not vaping at too high a wattage, and utilizing the optimal VG to PG ratio for your device. If you’ve followed this advice and are still getting dry hits, there might be a problem with your coil or gadget, or it could just be beyond its prime.
When should I replace my coils?
In general, you should replace your coils as soon as you detect a difference in taste, quantity of vape, or the appearance of your cotton wick. This usually takes one to four weeks.
Various things determine the length of time your coils endure. Certain of these factors include how much you vape, the flavors you choose (some brands and tastes known as “coil killers” are renowned for reducing coil lifespan), and the power at which you vape.
Whether you vape “mouth to lung” (MTL) or “direct to lung” (DTL) is another aspect that might affect how often you need to change your coils (DTL).
MTL vs. DTL: Which is Better?
When it comes to coil lifetime, MTL and DTL vaping differ in various ways. The vapor is drawn into your mouth before you inhale more air to bring it into your lungs with MTL vaping. In DTL vaping, you take a single breath and inhale the vapor directly from the coil.
MTL vaping uses substantially greater nicotine concentrations than DTL, which, when paired with the tighter airflow, creates an experience similar to smoking a cigarette. DTL vaping gives you a more powerful vape with bigger clouds and a smoother hit.
Sub-ohm coils are used in DTL vaping, and they demand a lot of juice to produce those enormous clouds. Those intended for MTL vaping tend to last much longer than sub-ohm coils. Because considerably less power runs across the waves and thus runs at lower wattages, they last longer.
E-liquids aren’t all made equal.
Some e-liquids will destroy your coils far more quickly than others, and VG has a reputation for leaving more residue than PG, and Vapers that use high-VG juice will burn through their coils more rapidly than others.
The color of your e-liquid has a direct association with how rapidly it causes a build-up on your coil, which results in burnt hits. In general, the darker an e-liquid is, the more residue it produces. Furthermore, many vapers have noticed that the more sugar in a juice, the faster it kills its coils.
If you want your coils to last as long as possible, stick to light-colored, fruity-flavored juices with low VG levels.
Coils aren’t all made equal.
Running your coils beyond the manufacturer’s suggested wattage is a certain way to fry them to a bitter, nasty-tasting crisp. However, various manufacturers take quite diverse methods to coil engineering. The length of time varies greatly between multiple brands, and even under the same brand, different models might have vastly varied life periods. Doing your homework before making a purchase will pay off.
Before you spend any money, perform a fast search on the internet’s countless vaping forums to have a decent understanding of what you’re getting.
What if my new coil has a burned flavor to it?
You could have a dud if you’ve primed your coil correctly, but it tastes burnt when you use it. Rings and other throwaway goods are mass-produced in massive quantities. Because of the enormous production volume, there will always be a few faulty units that make it past quality control. The good news is that today’s major vape firms’ production standards are considerably superior to what they were even a few years ago.
Main Points to Remember
The last thing anyone wants is smoldering hits. Follow these easy precautions to prevent choking on burnt cotton smoke.
- Always make sure your coils are properly primed.
- It’s best not to smoke in a chain! A ten-second delay between puffs can save you a lot of suffering.
- Stick to the wattages specified by the manufacturer.
- Stop if you’re getting dry hits! Examine the problem and consider how you might improve it.
- Fellow vapers, stay hit-free and burned!